Steel Riveting Block - 25-045

Description

This steel riveting block will help you form rivets quickly and consistently.
The holes in the middle are about 1.8 mm deep, to create a "head" on both sides
The circles on the right side are for riveting eyelets in 3 different sizes without flattening the rounded rims
Circles and dimples on the sides for more choices
12G, 14G, 16G, and 18G sizes
When you use this tool there is no more guesswork on the length of wire to be cut, which reduces waste! The holes at the top, marked 18/16 and 14/12, will help you to pre-cut the perfect length of wire for your projects and to create the rivet head on both sides. The holes in the middle are approximately 1.8mm deep. The holes are marked 12 gauge,14 gauge,16 gauge, and 18 gauge. The dimples on the left side of each number are used for support when riveting in order to hold the shape of the rounded rivet head. The circles on the right side are for riveting eyelets in 3 different sizes without flattening the rounded rims. There are more dimples on the side of the block for rivets and on the opposite side are circles for eyelets. Both of these sides are for CURVED surfaces and must be mounted in a bench vise.
If you have any questions please feel free to contact us.
Please visit our store for other great jewelry and watch tools such as; Torches, Hand Tools, Crucibles, Stamps, Tongs, Borax and Much Much More!
And Always, Thank You for Looking!